Deliver aluminum profile Horizontal Powder Coating Machine Line to Belize
Delivery aluminum horizontal powder coating line to Belize in North America.
The Main advantage of horizontal powder coating line are: adaptability to ultra long,heavy,irregular materials, strong flexibility, low investment and maintenance, stable coating quality, low energy consumption, safety and easy management, suitable for small and medium-sized batch and multi variety production.
Strong adaptability of workpieces (most prominent) for aluminum horizontal powder coating line:
Super long,super heavy aluminum friendly: It can stably transport 6-12 meter long profiles, aluminum veneers, and heavy components without the risk of sagging or deformation, solving the problem of vertical line suspension deflection.
Adaptation to irregular,complex cross-sections for aluminum powder coating line: Easily handle curved, bent, hollow, and multi cavity profiles, and with multi axis robotic arms, achieve full coverage without dead corners.
Flexible mixed line production: compatible with orders of different lengths, sections, and colors on the same line, fast color change (about 15-30 minutes), suitable for small batch and multi variety modes.
Simple structure, low investment and maintenance costs for horizontal powder coating line:
Low equipment cost: 20-30% cheaper than vertical lines of the same production capacity, ground layout does not require high-rise steel structures, and the net height of the factory building is ≥ 4.5 meters.
Reliable conveying system for aluminum powder coating machine: using roller/flat chain conveying, with intuitive structure, few faults, easy maintenance, and can be quickly checked by ordinary technicians; The hanger pitch can be infinitely adjusted to fit any length.
Low maintenance costs for aluminum powder coating line: Vulnerable parts (chains, bearings, spray guns) are cheap and easy to purchase, and the annual maintenance cost is about 40% lower than that of vertical lines.
Stable coating quality and high yield rate for aluminum powder coating line:
No hanging marks: Horizontal support avoids vertical line hanging point pinch marks, both ends leak spraying, the six sides of the profile are evenly covered, and there are no yin or yang surfaces.
Thickness controllable and uniform: electrostatic spray gun+programmable trajectory, coating thickness error ≤± 5 μ m , strong adhesion, salt spray resistance ≥ 3000 hours .
Uniform curing: When heated horizontally, there is no temperature difference between the upper and lower parts, and the furnace temperature is ± 3 ℃, to prevent sagging, pinholes, and color differences.
Flexible production, fast color and type change for aluminum powder coating line:
Quick color change: The spray booth adopts a large cyclone and filter recovery, with a powder recovery rate of * * ≥ 97%, fast color cleaning, minimal residue, and supports quick switching of 200+colors * *.
Convenient online detection: Horizontal conveying facilitates the setting of intermediate quality inspection stations, defects can be repaired in real time, and rework can be reduced.
Large production capacity flexibility: The line speed can be adjusted from 1-6 m/min, with an annual output of 4000-8000 tons, and can be flexibly increased/decreased according to orders.
Low energy consumption, environmentally friendly and safe for horizontal powder coating line
Significant energy saving: The curing furnace is sealed and insulated, with fast heating and low heat loss, and energy consumption is 15-20% lower than that of a vertical line; Infrared/hot air options are available, suitable for different powders.
Environmental compliance: Powder closed-loop recycling, no dust spillage; Centralized treatment of wastewater/exhaust gas, easy to meet national and European standards.
Safe and easy to manage for aluminum powder coating line: There is no risk of high-altitude operations during ground operations, easy and safe loading and unloading, and a low rate of work-related injuries; The workshop is clean and transparent, and 5S management is easy to implement.
Flexible layout and good site adaptability for aluminum powder coating line
Diverse layout options: available in straight, U-shaped, and L-shaped layouts, suitable for narrow/square factory buildings; Pre treatment, spraying, and curing are modularized in sections for easy phased expansion.
No dependence on high-rise buildings for aluminum powder coating machine: No need for a height of more than 10 meters, low cost and short cycle of renovating old factory buildings.
Typical Applicable Scenarios
Architectural aluminum profiles (doors, windows, curtain walls, handrails)
Ultra long and heavy-duty industrial aluminum profiles (6-12 meters)
Irregular and complex cross-section aluminum material (bent, curved, hollow)
Small batch, multi variety, and multi color orders
Old factory renovation, limited budget, pursuit of high cost-effectiveness
Send us the following information, will send details offer:
| maximum profile length |
| heating fuel type, LPG,Natural gas, or diesel oil？ |
| Monthly production capacity |
| space size for putting aluminum powder coating line |
| voltage and frequency for machine working |
| need manual painting or automatic painting？ |
Contact us for horizontal powder coating line:
| email:melody@chanjeou.com |
| whats app:+86 13450531604 |